Test Results Assure The Product Quality
In environmental durability (bond strength) and accelerated aging test, the Formacore aluminum composite panels withstood 1,000 hours of 100% relative humidity at 120ºF and maintained a minimum tensile strength of 300psi.
Fire Safety And Flammability Testing
All of the principal components of the Formacore panels: the aluminum face, honeycomb core and aluminum liner, are inorganic. Consequently, they do not contribute in any way to the ignitability or flame propagation characteristics of the total wall assembly. (A controlled quantity of laminating adhesive is the only organic component within the panel.)
引用各种艳照门_引用各种艳照门 高清大全, 法国电影情人未删减版百度云 高清完整视频
|Sound Transmission Loss Test||STC = 28||ASTM E90-02 and E413087|
|Flame Spread*||5||ASTM E-84|
|Smoke Development||0||ASTM E-84|
0.012 ppm/mg weight loss
|Finishes: Adhesion||No lift off||ASTM D3359, Method A|
|Finishes: Impact Resistance||No lift off||ASTM D2794|
|Finishes: Flexibility||Pass||ASTM D1737-62,53T|
|Finishes: Taber Abrasion||1,000 cycles of the CS- 10|
wheels 5.6-mg weight loss
*Any numerical flame spread classification referred to in this brochure does not define the hazard presented by this material under actual fire conditions.
Potential heat of the Formacore panel is approximately 1,600 BTU's/square foot, which is well below the 6,000 BTU's/square foot maximum permitted under both ICBO and SBCCI.